BatteryStack v1.0 print settings
================================
Printer: Bambu Lab A1 / A1 Mini class FDM printer
Material: PLA or PLA+ recommended for indoor storage
Nozzle: 0.4 mm
Layer height: 0.20 mm
Walls: 3
Top/bottom layers: 4
Infill: 20%
Supports: OFF
Brim: OFF unless your printer has adhesion issues
Orientation: flat base on build plate, open battery wells upward
Speed: standard/high-speed PLA profile; verify first layer

Approximate starting estimates:
AA module: ~2.0 h, ~75 g material
AAA module: ~1.8 h, ~68 g material
9V module: ~1.5 h, ~60 g material
Status slider: <10 min, <10 g material

IMPORTANT:
These are production-intent prototypes, not safety-certified battery products.
Test fit and connector tolerances before selling. Do not store damaged, leaking,
hot, swollen or otherwise compromised batteries in the printed boxes.